Hotwav IP7s Plus Firmware SC7731 Flash File Cm2 Read


- > Wait phone connected ...

Phone found! [ 38 ]
Port Opened
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Boot Ok!

Model Name  : sp7731g_1h10_hd_native
Model Brand : HOTWAV
Model Device: sp7731g_1h10
AndrVersion : 6.0
BaseBand CPU: SP7731GEA_HDR
Project Ver : K19_HOTWAV_IP7s_Plus_V20_220_20170616
Model Ext   : IP7s Plus

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W16.29.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2080 MiB
Saved to : C:\Users\babu\Desktop\read\hotwav\ip7s plus\SP7731GEA_HDR_sp7731g_1h10_6.0_K19_HOTWAV_IP7s_Plus_V20_220_20170616_IP7s_Plus\

Elapsed: 00:18:39

Reconnect Power/Cable!

Paid File $3

How To Flash:
1. FactoryDownload/ResearchDownload
2. Unpack ROM and extract File.pac
3. Run ResearchDownload or FactoryDownload
4. Click on "Load packet" and add the .pac
5. Click on "Start"
6. Connect your android device to the computer
7. During the flashing your mobile will restart automatically
8. Finish

Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile
Hotwav IP7s Plus Firmware SC7731 Flash File Cm2 Read Hotwav IP7s Plus Firmware SC7731 Flash File Cm2 Read Reviewed by mtk firmware on 10:08 AM Rating: 5

No comments:

Powered by Blogger.